Basement leaking because of plumbing failure?
Are you intrigued by how your plumbing system works? Waterproofing & Plumbing can be intimidating to many people on the surface, but it is really not that difficult to learn. Many plumbing issues can be addressed by a simple fix. You can start learning more about plumbing by reading this article for some useful tips.
Before starting any waterproofing or plumbing project be sure to turn off the main water supply. Water damage or drain repair can be one of the most expensive things to repair. To minimize damage turn the main water supply off as well as any shut-off valves near where you are working. This will save a great deal of hardship later on.
If your pipes bang when you turn on the water, and all the pipes are anchored correctly, you should add some straps or cushion the pipes with a rubber blanket. There may be times when you will need to do both. Make sure that if you have copper pipes, you are not using galvanized straps.
Ensure that everyone in your household knows how to turn off the main water supply, or knows how to contact someone who can. In the event of a burst pipe or other water-related emergency, you should immediately turn off the water to prevent flooding, structural damage, and a sky-high water bill.
If you have noisy pipes, you can cushion them with a rubber blanket or add additional anchor straps. Banging pipes are usually caused by loose pipes, water hammering to a stop as you turn it off, or hot water pipes shifting in their position. All of these problems can be solved by cushioning and anchoring the pipes.
If you have issues with the concrete leaks or a plumbing failure making a hammering sound when you turn it off, check your water pressure. Any time your water pressure is above 80 PSI, you will hear extra water noise. This can be easily solved by the installation of a pressure-reducing valve, which can be done by most homeowners.
Avoid the bursting of pipes due to the change in the temperature. You need to allow the flow of heat to reach under the sinks and into the pipes, you have to keep the cabinet doors of the bathrooms and kitchens open. It is important to keep water running at both hot and cold faucets along with vanities that are in close proximity to exterior walls.
Make sure everyone in your home knows where the main water shut off valve is and that they know how to work it. That way, if there is a water problem, anyone in your household can turn off the water, thereby reducing the chances that your home will incur major water damage.
If water backs up from one sink to another, it is because the lines are connected. The part of the branch line for one device might be higher than another, but most likely there is also a blockage in the branch line connecting the two devices as well. This blockage must be cleaned.
Your water heater works more during the fall and winter so make sure that you eliminate all sediment buildup around this piece of equipment. Flushing this device can lead to increased longevity so that you do not face basement waterproofing or plumbing problems during the winter. This precaution will save time, money and effort.
As you can see, home plumbing is not rocket science. All you need to do is to find reliable sources that will give you great tips on addressing basement leaks or plumbing failure problems. The time you invest in educating yourself on plumbing issues will be time well-spent, because it will save you a lot of money in the long run.
